Home » Technical

Technical

Technical Category for all other technical stuff,

OMRON CX-ONE 4.40 x86 x64 FULL Download

Omron CX One 4.40

Omron CX-One 4.40 is a very handy a suite which will allow you to build, configure as well as a program lots of devices like PLCs, HMIs, networks and motion-control systems. This will reduce the hassle of the software maintenance and management at the End-User as well as OEM level.

Read More »

Omron CX-One 4.0 Full Download

OMRON CX-ONE v4.0

Omron CX-One 4.0 is a very handy a suite which will allow you to build, configure as well as a program lots of devices like PLCs, HMIs, networks and motion-control systems. This will reduce the hassle of the software maintenance and management at the End-User as well as OEM level.

Read More »

Allen Bradley RSLogix 500 /5000 Pro/RSView 32/RSLinx/PLC Simulator Full Download

Rslogix-5000

Allen Bradley RSLogix 500 + 5000 Pro + RSView 32 + RSLinx + PLC Simulator, Complex software for programming logic controllers of the Allen Bradley series. RSLogix 500 ™, which supports the SLC 500 ™ processor families and Allen-Bradley’s MicroLogix ™ processors, is the first programming tool that combines unparalleled performance with the industry’s best user interface.

Read More »

Rockwell Studio RSLogix 5000 Designer v28 (RSLogix, RSLinx) x86 x64

Rockwell Studio RSLogix 5000 v28 RSLonx Classic RSLogix Architect RSNetworks for ControlNet RSNetworks for DeviceNet RSNetworks for EtherNet FirmwareKits Activation Software (Factory Talk Activation Server and Factory Talk Activation Client Drive Executive

Read More »

RSLogix Studio 5000 v20 Design Environment Full Download

Studio_5000_Logix_Designer v20.png

RSLogix Studio 5000 Automation Engineering & Design Environment™ The RSLogix Studio 5000® environment combines elements of design into one standard framework that optimizes productivity and reduces time to commission. This intuitive integrated design environment focuses on rapid design, re-use, collaboration and virtual design and is built on a foundation consisting of several core tenants.

Read More »

Wonderware Development Studio Full Free Download

wonderware development studio

Development Studio provides an integrated engineering environment for all Supervisory SCADA, HMI and MES application development. The unified development environment enables Engineering personnel to build highly maintainable HMI SCADA applications while shortening the time-to-market.

Read More »

Lenze Engineer v2.27 Full Professional Download

Lenze-L-Force-Engineer Full Download

The Lenze Engineer: Engineering software ‘Engineer’ could be used for project planning and configuration up to operation of L-force automation and drive products from Lenze.

Read More »

SIEMENS SIMATIC TIA Portal v13.0 STEP 7 Pro FULL Download

SIEMENS SIMATIC TIA Portal STEP 7 Pro v13.0 FULL

Siemens has released the latest version of SIEMENS SIMATIC TIA Portal STEP 7 Pro v13.0 . Both STEP 7 Professional and STEP 7 Basic. This new release come with many features. They are:

Read More »

Simatic EKB Install 2018 TIA Portal 15 Full Download

EKB Install 2018 TIA 15

Simatic EKB Install 2018| 3041 keys v2018.08.19 add info for Sinumeric v4.8, Sinamics StartDrive v15 8b18c85790ed809c7ca863fada244cfd *Sim_EKB_Install_2018_08_19.exe v2018.07.31 internal for testing 9cc5d99394ebbfbc93415f36c97981be *Sim_EKB_Install_2018_07_31.exe v2018.07.25 add info for Simatic IT v7.1 d9caae5e99e08590e7acef87166c1c08 *Sim_EKB_Install_2018_07_25.exe v2018.06.08 add info for Simatic IT v7.1 d9caae5e99e08590e7acef87166c1c08 *Sim_EKB_Install_2018_07_25.exe v2018.06.08 add info for Simatic Automation Tool, Braumat 7.5 8843d2b9e8ae03679b4ea8695dd2fb73 *Sim_EKB_Install_2018_06_08.exe v2018.06.06 internal for testing v2018.05.20 add info for Simotion ...

Read More »

SIMATIC Logon V1.4 + SP4 Full Download

Simatic Lonon Full Download

A free ServicePack 4 (SP4) for SIMATIC Logon V1.4 is now available for download. It enables you to upgrade existing SIMATIC Logon versions 1.4, 1.4 + SP1, 1.4 + SP2 or 1.4 + SP3 to V1.4 + SP4. The authorizations of the preceding SIMATIC Logon V1.0, V1.1, V1.2 and V1.3 versions are no longer valid for SIMATIC Logon V1.4 and ...

Read More »

SIMATIC Logon v1.5 Free Download

The free SIMATIC Logon  v1.5 enables you to set Password Protection on Simatic Manager Project and PLC. That help you to protect the project program and data.

Read More »

Lenze EASY Starter V1.14 Full Download

Lenze EASY Starter supports service technicians during commissioning and maintenance work. Information on function extensions compared to EASY Starter V1.7 is provided in the difference description.

Read More »

Lenze Cam Designer Tool V3.2

Lenze Cam Designer Tool for easy cam profile generation from graphical profile characteristics. System Requirements for Lenze Cam Designer Microsoft® XP Professional (32 Bit) as of SP3 / Windows® 7  / Windows® 8 IBM-compatible PC with Intel Pentium  333 processor 128 MB RAM 250 MB free hard disk capacity Min. screen resolution of 1024 x 768 pixels with 256 displayable colours Pointer device ...

Read More »

Control Techniques Unidrive SP Mentor Drives

Emerson Control technique

Control Techniques Mentor II DC Drives Mentor II is a DC drive, (available in non-regenerative and regenerative models) easy to configure and possesses powerful diagnostic and communication abilities. The drives microprocessor can eliminate the need for a PLC and set-up is easy using the drive keypad, or MentorSoft software. Ideally suited for such applications as plastics production, wire drawing, winders, ...

Read More »

SIMATIC WinCC Compendium v7.0 / 7.2/ 7.3/ 7.4 Free Full Download

Simatic Wincc Compendium

Siemens has introduced SIMATIC WinCC 7.4, the newest version of the scalable and open SCADA system for maximum plant transparency and productivity. Due to the increasing globalization of business and rising competition, it is more advantageous to gain a shorter time-to-market. However, companies are forced to reduce machine downtime and to grow the quality of their products. The production data ...

Read More »

CUTES CT-3000FP AC Vector Inverter

CUTES CT-3000FP AC Vector Inverter

CUTES CT-3000FP AC Vector Inverter Model:CT-3000 Standard: 5HP~1000HP Open Loop Vector, closed loop vector and V/F control can be selected.\ Starting Torque 0.5Hz/150% (SVC); 0Hz/180% (FVC). Built-in simple PLC and control terminals can be used, up to 16-segment control can be performed. V/F separation control can be used. Built-in RS-485 communication. Built-in PID control & automatic voltage adjustment (AVR) function. ...

Read More »

CUTES CT-2000FG AC Inverter

CUTES CT-2000FG AC inverter

CUTES CT-2000FG AC inverter Built-in PI control Restart/Free run start PWN frequency 1.5~10KHz Output frequency 0.5~240.0Hz 10 patterns and any V/F pattern 8-step speed setting 2-step acceleration/deceleration Parameter input by key number 0~9 External analog setting 0~10V and 4~20mA Automatic torque compensation and slip compensation Frequency increase/decreaseUP / DOWNfunction and 16-step Function control setting Built-in standard RS422/485 communication port, MODBUS ...

Read More »

CUTES CT-2000ES Universal Frequency AC Inverter

CUTES CT-2000ES

CT-2000ES High Performance Miniaturized Universal Frequency AC Inverter Built-in PI control Restart/Free run start PWN frequency 1.5~10KHz Output frequency 0.5~240.0Hz 10 patterns and any V/F pattern 8-step speed setting 2-step acceleration/deceleration Parameter input by key number 0~9 External analog setting 0~10V and 4~20mA Automatic torque compensation and slip compensation Frequency increase/decreaseUP / DOWNfunction and 16-step Function control setting Built-in standard ...

Read More »

CUTES CT-2000E2 AC Inverter

CUTES CT-2000ES

CUTES CT-2000E2 High Functional Miniaturized Inverter Characteristic CUTES CT-2000E2 AC Inverter: Built-in PI control Restart/Free run start PWN frequency 1.5~10KHz Output frequency 0.5~240.0Hz 10 patterns and any V/F pattern 8-step speed setting 2-step acceleration/deceleration Parameter input by key number 0~9 External analog setting 0~10V and 4~20mA Automatic torque compensation and slip compensation Frequency increase/decreaseUP / DOWNfunction and 16-step Function control ...

Read More »

AUCOTEC Bremen AUCOPROVIS v2.7

AUCOPROVIS v2.7

AUCOPROVIS – the modular standard software for process visualization and process control systems, has proven itself for many years in industrial and technical systems. Whether as a standalone system or as a great engineering process control system in the paper industry, the modular scalability of AUCOPROVIS always provides a cost-effective use in all areas of production.

Read More »